新手上路
威望 点
金钱 Home币
贡献值 点
好评度 点
|
老伙计，请登录，欢迎回家
您需要 登录 才可以下载或查看，没有帐号？注册
x
EN 60669-2-1:2000—Switches for household and similar fixed electrical installations—Part 2: Particular requirements—Section 1: Electronic switches; Amendment A11:1997 to EN 60669-2-1:1996.
EN 60669-2-2:1998—Switches for household and similar fixed electrical installations—Part 2: Particular requirements—Section 2: Electromagnetic remote-control switches (RCS).
EN 60669-2-3:1999—Switches for household and similar fixed electrical installations—Part 2-3: Particular requirements—Time-delay switches (TDS).
EN 60687:1993—Alternating current static watt-hour meters for active energy (classes 0.2 S and 0.5 S).
EN 60730-1:2001—Automatic electrical controls for household and similar use—Part 1: General requirements; Amendment A11:1996 to EN 60730-1:1995; Amendment A17:2000 to EN 60730-1:1995.
EN 60730-2-11:1994—Automatic electrical controls for household and similar use—Part 2-11: Particular requirements for energy regulators; Amendment A1:1997 to EN 60730-2-11:1993.
EN 60730-2-13:1998—Automatic electrical controls for household and similar use—Part 2-13: Particular requirements for humidity sensing controls.
EN 60730-2-14:1998—Automatic electrical controls for household and similar use—Part 2-14: Particular requirements for electric actuators.
EN 60730-2-18:1999—Automatic electrical controls for household and similar use—Part 2-18: Particular requirements for automatic electrical water and air-flow sensing controls, including mechanical requirements.
EN 60870-2-1:1996—Telecontrol equipment and systems—Part 2: Operating conditions—Section 1: Power supply and electromagnetic compatibility.
EN 60945:2002—Maritime navigation and radiocommunication equipment and systems—General requirements—Methods of testing and required test results.
EN 60947-1:1999—Low-voltage switch gear and control gear—Part 1: General rules.
EN 60947-2:1996—Low-voltage switch gear and control gear—Part 2: Circuit breakers; Amendment A1:1997 to EN 60947-2:1996.
EN 60947-3:1999—Low-voltage switch gear and control gear—Part 3: Switches, disconnectors, switch-disconnectors, and fuse-combination units.
EN 60947-4-1:2001—Low-voltage switch gear and control gear—Part 4-1: Contactors and motor starters—Electromechanical contactors and motor starters; Amendment A2:1997 to EN 60947-4-1:1992.
EN 60947-4-2:2000—Low-voltage switch gear and control gear—Part 4-2: Contactors and motor starters—Ac semiconductor motor controllers and starters.
EN 60947-4-3:2000—Low-voltage switch gear and control gear—Part 4-3: Contactors and motor starters—Ac semiconductor controllers and contactors for nonmotor loads.
EN 60947-5-1:1998—Low-voltage switch gear and control gear—Part 5-1: Control circuit devices and switching elements—Electromechanical control circuit devices; Amendment A12 to EN 60947-5-1:1997.
EN 60947-5-2:1999—Low-voltage switch gear and control gear—Part 5-2: Control circuit devices and switching elements—Proximity switches.
EN 60947-5-3:1999—Low-voltage switch gear and control gear—Part 5-3: Control circuit devices and switching elements—Requirements for proximity devices with defined behavior under fault conditions (PDF).
EN 60947-5-6:2001—Low-voltage switch gear and control gear—Part 5-6: Control circuit devices and switching elements—Dc interface for proximity sensors and switching amplifiers (NAMUR).
EN 60947-6-1:1992—Low-voltage switch gear and control gear—Part 6-1: Multiple-function equipment—Automatic transfer switching equipment; Amendment A2:1997 to EN 60947-6-1:1991.
EN 60947-6-2:1993—Low-voltage switch gear and control gear—Part 6-2: Multiple-function equipment—Control and protective switching devices (or equipment) (CPS); Amendment A1:1997 to EN 60947-6-2:1993.
EN 61000-3-2:2001—Electromagnetic compatibility (EMC)—Part 3-2: Limits—Limits for harmonic current emissions (equipment input current up to and including 16 A per phase).
EN 61000-3-3:1995—Electromagnetic compatibility (EMC)—Part 3-3: Limits—Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current less than or equal to 16 A per phase and not subject to conditional connection; Amendment A1:2001 to EN 61000-3-3:1995.
EN 61000-3-11:2000—Electromagnetic compatibility (EMC)—Part 3-11: Limits—Limitation of voltage changes, voltage fluctuations, and flicker in public low-voltage supply systems—Equipment with rated current less than or equal to 75 A and subject to conditional connection.
EN 61000-6-1:2001—Electromagnetic compatibility (EMC)—Part 6-1: Generic standards—Immunity for residential, commercial, and light-industrial environments.
EN 61000-6-2:2001—Electromagnetic compatibility (EMC)—Part 6-2: Generic standards—Immunity for industrial environments.
EN 61000-6-3:2001—Electromagnetic compatibility (EMC)—Part 6-3: Generic standards—Emission standard for residential, commercial, and light-industrial environments.
EN 61000-6-4:2001—Electromagnetic compatibility (EMC)—Part 6-4: Generic standards—Emission standard for industrial environments.
EN 61008-1:1995—Electrical accessories—Residual current–operated circuit breakers (RCCBs) without integral overcurrent protection for household and similar uses—Part 1: General rules.
EN 61009-1:1995—Electrical accessories—Residual current–operated circuit breakers (RCCBs) with integral overcurrent protection for household and similar uses—Part 1: General rules.
EN 61036:1997—Alternating current static watt-hour meters for active energy (classes 1 and 2); Amendment A1:2000 to EN 61036:1996.
EN 61037:1992—Electricity metering—Tariff and load control—Particular requirements for electronic ripple control receivers; Amendment A1:1996 to EN 61037:1992; Amendment A2:1998 to EN 61037:1992.
EN 61038:1993—Electricity metering—Tariff and load control—Particular requirements for time switches; Amendment A2:1998 to EN 61038:1992.
EN 61131-2:2000—Programmable controllers—Part 2: Equipment requirements and tests.
EN 61204-3:2001—Low-voltage power supplies, dc output—Part 3: Electromagnetic compatibility (EMC).
EN 61268:1996—Alternating current static var-hour meters for reactive energy (classes 2 and 3).
EN 61326:1998—Electrical equipment for measurement, control, and laboratory use—EMC requirements.
EN 61543:1996—Residual current–operated protective devices (RCDs) for household and similar use—Electromagnetic compatibility.
EN 61547:1996—Equipment for general lighting purposes—EMC immunity requirements.
EN 61800-3:1997—Adjustable speed electrical power drive systems—Part 3: EMC product standard including specific test methods.
EN 61812-1:1996—Specified time relays for industrial use—Part 1: Requirements and tests.
CEN
EN 12015:1998—Electromagnetic compatibility—Product family standard for lifts, escalators, and passenger conveyors—Emission.
EN 12016:1998—Electromagnetic compatibility—Product family standard for lifts, escalators, and passenger conveyors—Immunity.
EN ISO 14982:1998—Agricultural and forestry machines—Electromagnetic compatibility—Test methods and acceptance criteria (ISO 14982:1998).
ETSI
EN 300 065-2 V1.1.1 (05-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (Navtex); Part 2: Harmonized EN covering essential requirements of Article 3.2 of the R&TTE Directive.
EN 300 065-3 V1.1.1 (05-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (Navtex); Part 3: Harmonized EN covering essential requirements of Article 3.3 (e) of the R&TTE Directive.
EN 300 086-2 V1.3.1 (03-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment with an internal or external RF connector intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 113-2 V1.2.1 (04-2002)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and having an antenna connector; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 135-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Angle-modulated citizens band radio equipment (CEPT PR 27 Radio Equipment); Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 152-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Maritime emergency position indicating radio beacons (EPIRBs) intended for use on the frequency 121.5 MHz or the frequencies 121.5 MHz and 243 MHz for homing purposes only; Part 2: Harmonized R&TTE Directive.
EN 300 152-3 V1.1.1 (05-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Maritime emergency position indicating radio beacons (EPIRBs) intended for use on the frequency 121.5 MHz or the frequencies 121.5 MHz and 243 MHz for homing purposes only; Part 3: Harmonized EN under Article 3.3 (e) of the R&TTE Directive.
EN 300 162-2 V1.1.2 (12-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 2: Harmonized EN covering essential requirements under Article 3.3 of the R&TTE Directive.
EN 300 162-3 V1.1.1 (05-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 3: Harmonized EN covering essential requirements under Article 3.3 (e) of the R&TTE Directive.
EN 300 219-2 V1.1.1 (03-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment with an internal or external RF connector intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 220-1 V1.2.1 (11-1997)—Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices; Technical characteristics and test methods for radio equipment to be used in the 25 to 1000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Parameters intended for regulatory purposes.
EN 300 220-3 V1.1.1 (09-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices (SRD); Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 224-2 V1.1.1 (01-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); On-site paging service; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.
EN 300 279 V1.2.1 (02-1999)—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for private land mobile radio (PMR) and ancillary equipment (speech and/or nonspeech).
EN 300 296-2 V1.1.1 (03-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment using integral antennas intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 328-2 V1.2.1 (12-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread-spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 330-2 V1.1.1 (06-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive. |
|
|小黑屋|电磁兼容网 电磁兼容小小家 EMC工程师家园 电磁兼容(EMC)小小家学习园地
发表于 2008-12-17 22:50:29
