|
|
老伙计，请登录，欢迎回家
您需要 登录 才可以下载或查看，没有帐号？注册
x
IEC 60027 Letter symbols to be used in electrical technology...
IEC 60034 Rotating electrical machinery
IEC 60038 IEC Standard Voltages
IEC 60044 Instrument transformers
IEC 60044-1 Current transformers
IEC 60050 International Electrotechnical Vocabulary
IEC 60062 Marking codes for resistors and capacitors
IEC 60063 Preferred number series for resistors and capacitors
IEC 60065 Audio, video and similar electronic apparatus - Safety requirements
IEC 60068 Environmental Testing
IEC 60073 Basic Safety principles for man-machine interface, marking and identification
IEC 60076 Power Transformers
IEC 60079 Parts 1-14 Electrical Installations in Hazardous Areas
IEC 60085 Electrical insulation
IEC 60086 Primary batteries
IEC 60086-3 Watch batteries
IEC 60094 Magnetic tape sound recording and reproducing systems
IEC 60094-5 Electrical magnetic tape properties
IEC 60094-6 Reel-to-reel systems
IEC 60094-7 Cassette for commercial tape records and domestic use
IEC 60096 Radio-frequency cables
IEC 60098 Rumble measurement on Vinyl Disc Turntables
IEC 60099-4 Metal oxide Surge arresters without gaps for AC systems
IEC 60099-5 Selection and Application Recommendations
IEC 60134 Absolute maximum and design ratings of tube and semiconductor devices
IEC 60137 Bushings for alternating voltages above 1000V
IEC 60146 Semiconductor Converters
IEC 60169 Radio-frequency connectors
IEC 60169-2 unmatched coaxial connector (Belling-Lee TV Aerial Plug)
IEC 60169-8 BNC connector, 50 ohm
IEC 60169-9 SMC connector, 50 ohm
IEC 60169-10 SMB connector, 50 ohm
IEC 60169-15 SMA connector, 50 ohm
IEC 60169-16 N connector, 50 ohm or 75 ohm
IEC 60169-16 TNC connector, 50 ohm
IEC 60169-24 F connector, 75 ohm
IEC 60179 Sound Level Meters
IEC 60183 Guide to the selection of high voltage cables
IEC 60204 Safety of machinery
IEC 60214 On-load tap changers
IEC 60228 Conductors of insulated cables
IEC 60233 Tests on Hollow Insulators for use in Electrical Equipment
IEC 60238 Edison screw lampholders
IEC 60255 Electrical Relays
IEC 60268 Sound system equipment
IEC 60268-1 General
IEC 60268-2 Explanation of general terms and calculation methods
IEC 60268-3 Amplifiers
IEC 60268-4 Microphones
IEC 60268-5 Loudspeakers
IEC 60268-6 Auxiliary passive elements
IEC 60268-7 Headphones and earphones
IEC 60268-8 Automatic gain control devices
IEC 60268-9 Artificial reverberation, time delay and frequency shift equipment
IEC 60268-10 Peak programme level meters
IEC 60268-11 Application of connectors for the interconnection of sound system components
IEC 60268-12 Application of connectors for broadcast and similar use
IEC 60268-13 Listening tests on loudspeakers
IEC 60268-14 Circular and elliptical loudspeakers; outer frame diameters and mounting dimensions
IEC 60268-16 Objective rating of speech intelligibility by speech transmission index
IEC 60268-17 Standard volume indicators
IEC 60268-18 Peak programme level meters - Digital audio peak level meter
IEC 60270:2000 "High-Voltage Test Techniques - Partial Discharge Measurements"
IEC 60287 Calculation of permissible current in cables at steady state rating
IEC 60296 Mineral Insulating oils for transformers & switchgear
IEC 60297 19-inch rack
IEC 60309 Plugs, socket-outlets and couplers for industrial purposes
IEC 60317 Specifications for particular types of winding wires
IEC 60320 Appliance couplers for household and similar general purposes
IEC 60331 Tests for Electric Cables under Fire Conditions
IEC 60335 Safety of electrical household appliances
IEC 60364 Electrical installations of buildings
IEC 60386 Method of measurement of speed fluctuations in sound recording and reproducing equipment
IEC 60417 Graphical symbols for use on equipment
IEC 60439 Low voltage switchgear and controlgear assemblies - Part 1:Type-Tested and partially type tested assemblies
IEC 60445 Basic and safety principles for man-machine interface
IEC 60446 Wiring colours
IEC 60502 Power cables with extruded insulation and their accessories for rated voltages from 1KV upto 30KV
IEC 60529 Degrees of protection provided by enclosures (IP Code)
IEC 60574 Audio-visual, video and television equipment and systems
IEC 60598-1 Luminaires: General Requirements
IEC 60559: 1989 Binary floating-point arithmetic for microprocessor systems (equivalent to IEEE 754-1989)
IEC 60694 Common clauses for high-voltage switchgear and control gear standards
IEC 60601-1 Medical Electrical Equipment — Part 1: General Requirements for Safety.
IEC 60601-1-1 Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical system.
IEC 60601-1-2 Medical electrical equipment - Part 1-2 : General requirements for safety - Section 2: Collateral standard: Electromagnetic compatibility - Requirements and tests.
IEC 60601-1-4 Medical Electrical Equipment - Part 1-4: General Requirements for Safety - Collateral Standard. Programmable Electrical Medical Systems.
IEC 60601-1-8 Medical Electrical Equipment - Part 1-8: General Requirements for Safety - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems. First edition in August 2003
IEC 60601-1-9 Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design. First Edition Jul 2007
IEC 60603 Connectors for frequencies below 3 MHz for use with printed boards
IEC 60603-2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm (0.1 in) with common mounting features
IEC 60603-7-1: Connectors for electronic equipment — Part 7-1: Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality
IEC 60603-7-2: Connectors for electronic equipment — Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
IEC 60603-7-4: Connectors for electronic equipment — Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
IEC 60603-7-5: Connectors for electronic equipment — Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
IEC 60603-7-7: Connectors for electronic equipment — Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 600 MHz
IEC 60617 Graphical symbols for diagrams
IEC 60617-12 Binary logic elements
IEC 60651 Sound level meters
IEC 60694 High-voltage switchgear. Common specifications
IEC 60715 Dimensions of low-voltage switchgear and controlgear. Standardised mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations.
IEC 60721 Classification of environmental conditions
IEC 60726 Dry type power transformers
IEC 60747 Semiconductor devices
IEC 60748 Semiconductor devices - integrated circuits
IEC 60774 VHS/S-VHS video tape cassette system
IEC 60793 Optical fibres
IEC 60825 Laser safety
IEC 60812 - International Standard on Fault Mode and Effects Analysis
IEC 60870 Telecontrol equipment and systems
IEC 60870-1 General considerations
IEC 60870-2 Operating conditions
IEC 60870-3 Interfaces (electrical characteristics)
IEC 60870-4 Performance requirements
IEC 60870-5 Transmission protocols
IEC 60870-5-101 Companion standard for basic telecontrol tasks
IEC 60870-5-102 Companion standard for the transmission of integrated totals in electric power systems
IEC 60870-5-103 Companion standard for the informative interface of protection equipment
IEC 60870-5-104 Network access for IEC 60870-5-101 using standard transport profiles
IEC 60870-6 Telecontrol protocols compatible with ISO and ITU-T recommendations
IEC 60874 Connectors for optical fibres
IEC 60884 Plugs and socket-outlets for household and similar purposes
Defines general requirements of such plugs and sockets. The many particular forms used in different countries are listed in IEC/TR 60083 (formerly IECEE CEE-7).
IEC 60906 IEC system of plugs and socket-outlets for household and similar purposes
IEC 60906-1: Plugs and socket-outlets 16 A 250 V AC
This is the system the IEC recommends as the worldwide standard for countries using 220-240 V AC. Switzerland uses already a very similar plug.
IEC 60906-2: Plugs and socket-outlets 15 A 125 V AC
This is the system used in the United States, Canada, and Japan.
IEC 60906-3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, AC and DC
IEC 60908 Compact disk digital audio system
IEC 60921 Ballasts for tubular fluorescent lamps - Performance requirements
IEC 60929 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
IEC 60945 Maritime Navigation and Radiocommunication Equipment and Systems - General Requirements - Methods of Testing and Required Test Results
IEC 60947 Standards for low-voltage switchgear and controlgear
IEC 60950 Safety of information technology equipment
IEC 61000 Electromagnetic compatibility (EMC)
IEC 61000-2-1: Guide to electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
IEC 61000-2-7: Environment - Low frequency magnetic fields in various environments
IEC 61000-2-9: Environment - Description of HEMP environment. Radiated disturbance. Basic EMC publication
IEC 61000-2-10: Environment - Description of HEMP environment. Conducted disturbance
IEC 61000-3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
IEC 61000-3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
IEC 61000-3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
IEC 61000-3-6: Limits - Assessment of emission limits for distorting loads in MV and HV power systems
IEC 61000-3-7: Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems
IEC 61000-3-8: Limits - Guide to signalling on low-voltage electrical installations. Emission levels, frequency bands and electromagnetic disturbance levels
IEC 61000-3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ≤ 75 A and subject to conditional connection
IEC 61000-4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
IEC 61000-4-2: Testing and measurement techniques - Electrostatic discharge immunity tests. Basic EMC publication
IEC 61000-4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test. Basic EMC publication
IEC 61000-4-5: Testing and measurement techniques - Surge immunity test
IEC 61000-4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-8: Testing and measurement techniques - Power frequency magnetic field immunity test. Basic EMC publication
IEC 61000-4-9: Testing and measurement techniques - Pulse magnetic field immunity test. Basic EMC publication
IEC 61000-4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test. Basic EMC publication
IEC 61000-4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests. Basic EMC publication
IEC 61000-4-12: Testing and measurement techniques - Oscillatory waves immunity test. Basic EMC publication
IEC 61000-4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at A.C. power port, low frequency immunity tests
IEC 61000-4-14: Testing and measurement techniques - Voltage fluctuation immunity test
IEC 61000-4-15: Testing and measurement techniques - Flickermeter. Functional and design specifications. Basic EMC publication
IEC 61000-4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
IEC 61000-4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
IEC 61000-4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances
IEC 61000-4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication
IEC 61000-4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems
IEC 61000-4-27: Testing and measurement techniques - Unbalance, immunity test
IEC 61000-4-28: Testing and measurement techniques - Variation of power frequency, immunity test
IEC 61000-4-29: Testing and measurement techniques - Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IEC 61000-4-30: Testing and measurement techniques - Power quality measurement methods
IEC 61000-5-1: Installation and mitigation guidelines - General considerations. Basic EMC publication
IEC 61000-5-2: Installation and mitigation guidelines - Earthing and cabling
IEC 61000-5-5: Installation and mitigation guidelines - Specification of protective devices for HEMP conducted disturbance. Basic EMC publication
IEC 61000-5-7: Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code)
IEC 61000-6-1:Generic standard -EMC - Susceptibility - Residential, Commercial and Light industry
IEC 61000-6-2: Generic standard - EMC - Susceptibility - Industrial
IEC 61000-6-3: Generic standard - EMC - Emissions - Residential,Commercial and Light industry
IEC 61000-6-4: Generic standard - EMC - Emissions - Industry
IEC 61000-6-6: Generic standards - HEMP immunity for indoor equipment
IEC 61010-1: Safety requirements for electrical equipment for measurement, control and laboratory use, Part 1 general requirments.
IEC 61010-2-010 Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-020 Part 2-020: Particular requirements for laboratory centrifuges
IEC 61010-2-032 Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
IEC 61010-2-040 Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
IEC 61010-2-051 Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-061 Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
IEC 61010-2-081 Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-081am1 Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-101 Part 2-101 Particular requirements for in vitro diagnostic (IVD) medical equipment.
IEC 61043 Sound intensity meters with pairs of microphones
IEC 61131 PLC programming.
IEC 61131-3 defining PLC programming languages.
IEC 61149 Safety of mobile radios
IEC 61158 Digital data communications for measurement and control - Fieldbus for use in industrial control systems
IEC 61158-SER Digital data communications for measurement and control - Fieldbus for use in industrial control systems - ALL PARTS
IEC 61158-1 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 1: Overview and guidance for the IEC 61158 series
IEC 61158-2 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification and service definition
IEC 61158-3 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition
IEC 61158-4 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification
IEC 61158-5 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition
IEC 61158-6 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification
IEC 61162 Maritime navigation and radiocommunication equipment and systems
IEC 61162-1 Single talker and multiple listeners
IEC 61162-2 Single talker and multiple listeners, high-speed transmission
IEC 61162-4 Multiple talkers and multiple listeners
IEC 61162-400 Ship systems interconnection - Introduction and general principles
IEC 61162-401 Ship systems interconnection - Application profile
IEC 61162-410 Ship systems interconnection - Transport profile requirements and basic transport profile
IEC 61162-420 Ship systems interconnection - Companion standard requirements and basic companion standards
IEC 61280 Field testing method for measuring single mode fibre optic cable
IEC 61286 Character set with electrotechnical symbols (ISO-IR 181 [1])
IEC 61355 Classification and designation of documents for plants, systems and equipment
IEC 61400 Wind turbines
61400-1: Design requirements
61400-2: Design requirements for small wind turbines
61400-3: Design requirements for offshore wind turbines
61400-11: Acoustic noise measurement techniques
61400-12: Wind turbine power performance testing
61400-12-1: Power performance measurements of electricity producing wind turbines
61400-13: Measurement of mechanical loads
61400-14: Declaration of apparent sound power level and tonality values
61400-21: Measurement and assessment of power quality characteristics of grid connected wind turbines
61400-23: Full-scale structural testing of rotor blades
61400-24: Lightning protection
61400-25: Information and information exchange for wind power plants[2]
61400-25-1: Communications for monitoring and control of wind power plants – Overall description of principles and models
61400-25-2: Communications for monitoring and control of wind power plants – Information models
61400-25-3: Communications for monitoring and control of wind power plants – Information exchange models
61400-25-4: Communications for monitoring and control of wind power plants – Mapping to communication profile
61400-25-5: Communications for monitoring and control of wind power plants – Conformance testing
IEC 61499 Function blocks
IEC 61499-1 Architecture
IEC 61499-2 Software tool requirements
IEC 61499-3 Tutorial information
IEC 61499-4 Rules for compliance profiles
IEC 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems
IEC 61511 Functional safety - safety instrumented systems for the process industry sector
IEC 61557 Equipment for measuring electrical safety in low-voltage distribution systems
IEC 61588 Precision clock synchronization protocol for networked measurement and control systems
IEC 61603 Infrared transmission of audio or video signals
IEC 61643 Surge protective devices connected to low-voltage power distribution systems
IEC 61690 Electronic design interchange format, EDIF
IEC 61690-1 Version 3 0 0
IEC 61690-2 Version 4 0 0
IEC 61784 Digital data communications for measurement and control
IEC 61784-1 Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
IEC 61800 Adjustable speed electrical power drive systems
IEC 61850 Communication Networks and Systems in Substations
IEC 61966 Multimedia systems -- Colour measurement
IEC 61966-2-1 sRGB default RGB colour space
IEC 61966-2-4 xvYCC, the extended-gamut YCC colour space
IEC 61968 Application integration at electric utilities – System interfaces for distribution management
IEC 61970 Application integration at electric utilities – Energy management system application program interface (EMS-API)
IEC 62040 Uninterruptible power systems
IEC 62040-1 General and safety requirements for UPS used in operator access areas
IEC 62040-2 Electromagnetic compatibility (EMC) requirements
IEC 62040-3 Method of Specifying the Performance and Test Requirements
IEC 62056 DLM/COSEM communication protocol for reading utility meters
IEC 62196 Plugs and sockets for charging electric vehicles
IEC 62264 Enterprise-control system integration
IEC 62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC 62270 Hydroelectric power plant automation - Guide for computer-based control
IEC 62271 Standards for high-voltage switchgear and controlgear
IEC 62271-100 High-voltage alternating current circuit breakers
IEC 62271-102 Alternating current disconnectors and earthing switches
IEC 62271-107 AC Fuse Switches 1-52kV
IEC 62271-200 AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
IEC 62271-203 Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above
IEC 62278 Railway applications – Specification and demonstration of reliability, availability, maintainability and safety (RAMS)
IEC 62304 Medical Device Software - Software Life Cycle Processes
IEC 62351 Power System Control and Associated Communications - Data and Communication Security
IEC 62351-1: Data and Communication Security – Introduction
IEC 62351-2: Data and Communication Security – Glossary of Terms
IEC 62351-3: Data and Communication Security – Profiles Including TCP/IP
IEC 62351-4: Data and Communication Security – Profiles Including MMS
IEC 62351-5: Data and Communication Security – Security for IEC 60870-5 and Derivatives (i.e. DNP 3.0)
IEC 62351-6: Data and Communication Security – Security for IEC 61850 Profiles
IEC 62351-7: Data and Communication Security – Security Through Network and System Management
IEC 62379-1: Common control interface for networked digital audio and video products-General
IEC 62443 Industrial communication networks - Network and system security (DRAFT)
IEC 62443-1 Terminology, concepts and models
IEC 62443-2 Establishing an industrial automation and control system security program
IEC 62443-3 Operating a manufacturing and control systems security program
IEC 62443-4 Specific security requirements for manufacturing and control systems
IEC 62443-5 Security technologies for industrial automation and control systems |
|
|小黑屋|电磁兼容网 电磁兼容小小家 EMC工程师家园 电磁兼容(EMC)小小家学习园地
发表于 2008-12-2 15:44:59
