电磁兼容小小家

 找回密码
 注册
查看: 1980|回复: 0

International EMC standard list Part-3

[复制链接]
发表于 2008-12-17 22:51:17 | 显示全部楼层 |阅读模式

老伙计,请登录,欢迎回家

您需要 登录 才可以下载或查看,没有帐号?注册

x
  EN 300 339 V1.1.1 (06-1998)—Electromagnetic compatibility and radio spectrum matters (ERM); General electromagnetic compatibility (EMC) for radio communications equipment.

EN 300 341-2 V1.1.1 (12-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service (RP 02); Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 300 385 V1.2.1 (10-1999)—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for fixed radio links and ancillary equipment.

EN 300 385/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for fixed radio links and ancillary equipment with data rates at around 2 Mbit/sec and above.

EN 300 386 V1.3.2 (05-2003)—Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equip-ment; Electromagnetic compatibility (EMC) requirements.

EN 300 386-2:1997—Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard.

EN 300 390-2 V1.1.1 (09-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.

EN 300 422-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 300 433-2 V1.1.1 (12-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Double sideband (DSB) and/or single sideband (SSB) amplitude modulated citizens band radio equipment; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.

EN 300 440-2 V1.1.1 (09-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 300 454-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Wide band audio links; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 300 827:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for terrestrial trunked radio (TETRA) and ancillary equipment.

EN 300 828:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands.

EN 300 829:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for maritime mobile earth stations (MMES) operating in the 1.5/1.6 GHz bands providing low-bit-rate data communications (LBRDC) for the global maritime distress and safety system (GMDSS).

EN 300 831:1999—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for mobile earth stations (MES) used within satellite personal communications networks (S-PCN) operating in the 1.5/1.6/2.4 GHz and 2 GHz frequency bands.

EN 301 011:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for narrow-band direct-printing (NBDP) Navtex receivers operating in the maritime mobile service.

EN 301 025-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class 'D' digital selective calling (DSC); Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 301 025-3 V1.1.1 (05-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class 'D' digital selective calling (DSC); Part 3: Harmonized EN under Article 3.3 (e) of the R&TTE Directive.

EN 301 090:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for maritime radiotelephone watch receivers operating on 2182 kHz.

EN 301 178-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Portable very-high frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 301 357-2 V1.2.1 (06-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Cordless audio devices in the range 25 MHz to 2000 MHz; Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

ETS 300 197/A2:1997—Transmission and multiplexing (TM); Parameters for radio relay systems for the transmission of digital signals and analog video signals operating at 38 GHz.

ETS 300 198/A1:1997—Transmission and multiplexing (TM); Parameters for radio relay systems for the transmission of digital signals and analog video signals operating at 23 GHz.

ETS 300 342-1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for European digital cellular telecommunications system (GSM 900 MHz and DCS 1800 MHz); Part 1: Mobile and portable radio and ancillary equipment.

ETS 300 384/A1:1997—Radio broadcasting systems; Very-high frequency (VHF), frequency modulated, sound broadcasting transmitters.

ETS 300 328/A1:1997—Radio equipment and systems (RES); Wideband transmission systems; Technical characteristics and test conditions for data transmission equipment operating in the 2.4 GHz ISM band and using spread-spectrum modulation techniques.

ETS 300 340/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for European radio message system (ERMES) paging receivers.

ETS 300 341/A1:1997—Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver.

ETS 300 224 (03-1998)—Electromagnetic compatibility and radio spectrum matters (ERM); On-site paging service; Technical and functional characteristics for on-site paging systems, including test methods.

ETS 300 279/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for private land mobile radio (PMR) and ancillary equipment (speech and/or nonspeech).

ETS 300 296/A1:1997—Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment using integral antennas intended primarily for analog speech.

ETS 300 329:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for digital enhanced cordless telecommunications (DECT) equipment.

ETS 300 390/A1:1997—Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment intended for the transmission of data (and speech) and using an integral antenna.

ETS 300 433/A2:1997—Radio equipment and systems (RES); Double-sideband (DSB) and/or single-sideband (SSB) amplitude modulated citizens band (CB) radio equipment; Technical characteristics and methods of measurement.

ETS 300 445/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for wireless microphones and similar radio-frequency (RF) audio link equipment.

ETS 300 446:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for second-generation cordless telephone (CT2) apparatus operating in the frequency band 864.1 to 868.1 MHz, including public access services.

ETS 300 447:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for VHF FM broadcasting transmitters.

ETS 300 454/A1:1997—Radio equipment and systems (RES); Wideband audio links; Technical characteristics and test methods.

ETS 300 460:1997—Satellite earth stations and systems (SES); Maritime mobile earth stations (MMES) operating in the 1.5/1.6 GHz bands providing low-bit-rate data communications (LBRDCs) for the global maritime distress and safety system (GMDSS); Technical characteristics and methods of measurement.

ETS 300 487/A1:1997—Satellite earth stations and systems (SES); Receive-only mobile earth stations (ROMES) operating in the 1.5 GHz band providing data communications; Radio-frequency (RF) specifications.

ETS 300 673 V1.2.1 (03-2000)—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for 4/6 GHz and 11/12/14 GHz very small aperture terminal (VSAT) equipment and 11/12/13/14 GHz satellite news gathering (SNG) transportable earth station (TES) equipment.

ETS 300 680:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for citizens band (CB) radio and ancillary equipment (speech and/or non-speech); Part 1: Angle modulated; Part 2: Double sideband (DSB) and/or single sideband (SSB).

ETS 300 682:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for on-site paging equipment.

ETS 300 683:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for short-range devices (SRD) operating on frequencies between 9 kHz and 25 GHz.

ETS 300 684:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for commercially available amateur radio equipment.

ETS 300 717:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for analog cellular radio communications equipment; Mobile and portable equipment.

ETS 300 719-1:1997—Radio equipment and systems (RES); Private wide-area paging service; Part 1: Technical characteristics for private wide-area paging system.

ETS 300 741:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for wide-area paging equipment.

ETS 300 826:1997—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for 2.4 GHz wideband transmission systems and high-performance radio local-area network (HIPERLAN) equipment.

ETS 300 830:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for receive-only mobile earth stations (ROMES) operating in the 1.5 GHz band providing data communications.

Australian Standards

AS/NZS 1044:1995—Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for household and similar purposes, electric tools, and similar electric apparatus; Amendment 2:2000 to AS/NZS 1044:1995.

AS/NZS 1053:1999—Limits and methods of measurement of radio interference characteristics of sound and television receivers and associated equipment.

AS/NZS 2064:1997—Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment; Amendment 1:1997 to AS/NZS 2064:1997.

AS/NZS 2557:1999—Limits and methods of measurement of radio interference characteristics of vehicles, motor boats, and spark-ignited engine-driven vehicles.

AS/NZS 3548:1995—Limits and methods of measurement of radio disturbance characteristics of information technology equipment; Amendment 1:1997 to AS/NZS 3548:1995; Amendment 2:1997 to AS/NZS 3548:1995.

AS/NZS 3652:1998—Electromagnetic compatibility—Arc welding equipment.

AS/NZS 4051:1998—Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.

AS/NZS 4251.1:1999—Electromagnetic compatibility (EMC)—Generic emission standard—Residential, commercial, and light industry.

AS/NZS 4251.2: 1999—Electromagnetic compatibility (EMC)—Generic emission standard—Industrial environments.

AS 62040.2—Uninterruptible power systems—Electromagnetic compatibility (EMC) requirements.

Canadian Standards

CAN/CSA C108.1.1:1977 (R1999)—Electromagnetic interference measuring instrument—CISPR type.

CAN/CSA C108.1.2:M1981 (R1999)—Electromagnetic interference measuring instrument—ANSI type.

CAN/CSA C108.1.5-M85 (R1999)—Line impedance stabilization network (LISN).

CAN/CSA C108.3.1-M84 (R2000)—Limits and measurement methods of electromagnetic noise from ac power systems, 0.15–30 MHz.

CAN/CSA-C108.4-M92 (R2003)—Limits and methods of measurement of radio interference characteristics of vehicles, motorboats, and spark-ignited engine-driven devices.

CAN/CSA-C108.6-M91 (R2003)—Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment (adopted CISPR 11:1990).

CAN/CSA C108.8-M83 (R2000)—Limits and methods of measurement of electromagnetic emissions from data processing equipment and electronic office machines.

CAN/CSA-C108.9-M91 (R1999)—Sound and television broadcasting receivers and associated equipment—limits and methods of measurement of immunity characteristics.

CAN/CSA-CEI/IEC 1000-1-1-97 (R2001)—Electromagnetic compatibility (EMC)—Part 1: General—Section 1: Application and interpretation of fundamental definitions and terms (adopted CEI/IEC 1000-1-1:1992).

CAN/CSA-CEI/IEC 1000-2-1-97 (R2001)—Electromagnetic compatibility (EMC)—Part 2: Environment—Section 1: Description of the environment—Electromagnetic environment for low frequency conducted disturbances and signalling in public power supply systems (adopted CEI/IEC 1000-2-1:1990).

CAN/CSA CISPR 22-02—Limits and methods of measurement of radio disturbance characteristics of information technology equipment. Adopted CISPR 22:1997, third edition, 1997-11 with Canadian deviations.

CAN/CSA E1000-2-2:1997 (R2001)—Electromagnetic compatibility (EMC)—Part 2: Environment—Section 2: Compatibility levels for low frequency conducted disturbances and signalling in public low-voltage power supply systems (adopted CEI/IEC 1000-2-2:1990).

CAN/CSA-CEI/IEC 61000-4-2-01—Electromagnetic compatibility (EMC)—Part 4-2: Testing and measurement techniques—Electrostatic discharge immunity test (Adopted CEI/IEC 61000-4-2:1995 + A1:1998, edition 1.1, 1999-05).

CAN/CSA-CEI/IEC 61000-4-3-01—Electromagnetic compatibility (EMC)—Part 4-3: Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test (Adopted CEI/IEC 61000-4-3:1995 + A1:1998, Edition 1.1, 1998-11).

CAN/CSA-CEI/IEC 61000-4-4-01—Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques—Section 4: Electrical fast transient/burst immunity test—Basic EMC publication (Adopted CEI/IEC 1000-4-4:1995, first edition, 1995-01, including Amendment 1:2000).

CAN/CSA-CEI/IEC 61000-4-5-01—Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques—Section 5: Surge immunity test (Adopted CEI/IEC 1000-4-5:1995, first edition, 1995-02, including Corrigendum October 1995 and Amendment 1:2000).

CAN/CSA-CEI/IEC 61000-4-6-01—Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques—Section 6: Immunity to conducted disturbances, induced by radio-frequency fields (Adopted CEI/IEC 1000-4-6:1996, first edition, 1996-03, including Corrigendum September 1996 and Amendment 1:2000).

CAN/CSA-CEI/IEC 61000-4-8-02—Electromagnetic compatibility (EMC)—Part 4-8: Testing and measurement techniques—Power frequency magnetic field immunity test (Adopted CEI/IEC 61000-4-8:1993 + A1:2000, edition 1.1, 2001-03).

CAN/CSA-CEI/IEC 61000-4-9-02—Electromagnetic compatibility (EMC)—Part 4-9: Testing and measurement techniques—Pulse magnetic field immunity test (Adopted CEI/IEC 61000-4-9:1993 + A1:2000, edition 1.1, 2001-03).

CAN/CSA-CEI/IEC 61000-4-11-01—Electromagnetic compatibility (EMC)—Part 4: Testing and measuring techniques—Section 11: Voltage dips, short interruptions, and voltage variations immunity tests (Adopted CEI/IEC 1000-4-11:1994, first edition, 1994-06 including Amendment 1:2000).

CAN/CSA-CEI/IEC 61000-4-12-01—Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques—Section 12: Oscillatory waves immunity test basic EMC publication (Adopted CEI/IEC 1000-4-12:1995, first edition, 1995-05, including Amendment 1:2000).

CAN/CSA-CEI/IEC 61000-4-16-02—Electromagnetic compatibility (EMC)—Part 4-16: Testing and measurement techniques—Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (Adopted CEI/IEC 61000-4-16:1998, first edition, 1998-01, including Amendment 1:2001).

CAN/CSA-CEI/IEC 61000-4-17-02—Electromagnetic compatibility (EMC)—Part 4-17: Testing and measurement techniques—Ripple on dc input power port immunity test (Adopted CEI/IEC 61000-4-17:1999, first edition, 1999-06, including Amendment 1:2001).

CAN/CSA-CEI/IEC 61000-4-27-01—Electromagnetic compatibility (EMC)—Part 4-27: Testing and measurement techniques—Unbalance, immunity test (Adopted CEI/IEC 61000-4-27:2000, first edition, 2000-08).

CAN/CSA-CEI/IEC 61000-4-28-01—Electromagnetic compatibility (EMC)—Part 4-28: Testing and measurement techniques—Variation of power frequency, immunity test (Adopted CEI/IEC 61000-4-28:1999, first edition, 1999-11).

发表回复

您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|小黑屋|电磁兼容网 电磁兼容小小家 EMC工程师家园 电磁兼容(EMC)小小家学习园地

GMT+8, 2024-12-24 08:47 , Processed in 0.091838 second(s), 19 queries .

快速回复 返回顶部 返回列表