电磁兼容小小家

 找回密码
 注册
查看: 1690|回复: 2

求解:电磁炉测试谐波注意事宜

[复制链接]
发表于 2012-3-7 12:25:53 | 显示全部楼层 |阅读模式

老伙计,请登录,欢迎回家

您需要 登录 才可以下载或查看,没有帐号?注册

x
  电磁炉电流谐波测试,如果电磁炉有两个锅底,那需要两个同时开启测试吗?还是测试其中一个就可以?
发表于 2012-3-8 11:26:59 | 显示全部楼层
C.11 Test conditions for induction hobs
Induction hobs are operated with an enamelled steel pan which contains approximately half
its capacity of water at room temperature, and positioned at the centre of each cooking zone,
in turn. Thermal controls are adjusted to their highest setting.
The diameter of the base of the pan is to be at least the diameter of the cooking zone. The
smallest pan complying with this requirement is used. The maximum concavity of the base of
the pan is 3D/1 000 where D is the diameter of the flat area of the base of the pan. The base
of the pan is not to be convex.
The concavity is checked at room temperature using an empty pan.
发表于 2015-1-8 09:54:21 | 显示全部楼层
一定是最差情况。

发表回复

您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|小黑屋|电磁兼容网 电磁兼容小小家 EMC工程师家园 电磁兼容(EMC)小小家学习园地

GMT+8, 2024-12-26 03:06 , Processed in 0.081031 second(s), 19 queries .

快速回复 返回顶部 返回列表